Welcome to Shenzhen Songhui Machine Equipment Co., LTD.



SMT Solder Paste Printer

Home>Product>SMT Solder Paste Printer

Product name:
Panasonic Screen Printer SPD
Product Feature

High-speed multiple snap-off for quality production

Ensure continuation o...

Panasonic Screen Printer SPV
Panasonic Screen Printer SPG


Dual printing stage that furthers productivity:

High-speed production
Printing the same product on the front and rear printing stages enables the creation of a high-production line.
Even for the single lane applied for the post process, the lane utilization can be enhanced by supplying PC boards from the front and rear stages.

Nonstop changeover
The preparation for the next product can be carried out during one-sided stage production, thereby eliminating the time for changeover.

Production of different types of PC boards
Printing different products on the front and rear printing stages help enhance utilization and avoid the necessity for intermediate stock.

Higher quality & higher productivity. Further pursuing of high quality printing with "the cornerstone of quality is printing":

Hybrid squeegee head
Owing to the motor control of vertical squeegee motions in addition to the uni-floating printing method, we have
achieved a reduction in printing time and the prevention of air entrapped in the solder paste.

Load detection unit
The printing head is mounted with the load detection unit to monitor the printing pressure during printing.
Measuring the solder amount attached to the squeegee prevents solder amount shortages on the mask.

PCB support function
The support plates, integrated with the conveyor rails, support the back side of the PC board from end to end, which realizes the stabilization of printing quality.

A variety of options that increase quality and productivity:

Automatic solder supply unit (option)
Automatically supplying (X-direction movable)solder onto masks enables a long period of continuous printing.

Inspection result feedback support (option)*
According to the correction data of shifted printing analyzed by solder paste inspection (APC correction data), it corrects printing positions (X,Y,θ)

Stencil height detection (option)
Laser processes can optimize a contact of PC boards with stencils so that stable printings can be provided

Mask vacuum support mask-release (option)
Printing mask can be vacuumed during printing and support-table release.
It can enable more stable rinting by eliminating shift and stick of a mask.

*3D inspection equipment of another company can be also connected. Please inquire with your sales representative for more details.


Model ID
Model No.
PCB dimensions (mm)
L 50 × W 50 to L 350 × W 300
Cycle time
5.5 s (Including PCB recognition ) *1
±12.5 µm (Cpk1.33)
Screen frame dimensions (mm)
L 736 × W 736 (Optional support for other sizes*2)
Electric source
1-phase AC 200, 220, 230, 240 V ±10V 1.5 kVA*3
Pneumatic source
0.5 MPa, 60 L/min (A.N.R.)
Dimensions (mm)
W 1 220 × D 2 530 × H 1 444 *4
2 250 kg*5

*1: PCB exchange time varies depending on the machine in the pre-process and the post process, the PCB size, the use of a PCB pressing-down unit and so forth.
*2: For mask specifications, please see the specification.
*3: Including blower and vacuum pump"Option"
*4: Except for the signal tower and the touch panel.
*5: Excluding options, etc.
*Values such as cycle time and accuracy may vary depending on operating conditions.
*Please refer to the ‘‘Specification” booklet for details.

Online Inquiry

  1. Purchase products:
  2. Contact:
  3. Tel:
  4. Email:
  5. Purchase title:
  6. Ordering instructions:

Related Products


SFG Electromechanical Equipment Co., Limited

Ware house:Building43, XinEr HongXiang industrial zone , Xinqiao street,Baoan distreet,Shenzhen HK address:RM517 NEW CITY CTR2 LEI YUE MUN RD KWUN TONG KLN,HONGKONG


Bruce +8613510016950





  1. Attention

Copyright 2019 SFG Electromechanical Equipment Co., Limited All Rights Reserved.